Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC June 10, 2008	Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC August 7, 2008	Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers.
U.S. CPSC July 22, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire.
U.S. CPSC March 3, 2010	Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers.
U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC December 18, 2003	Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC February 10, 2004	Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC November 4, 2004	Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC August 16, 2006	Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC August 3, 2007	LED Lights Recalled by Plan 9 Due to Fire Hazard The circuit board in the lights can overheat, posing a risk of fire.
U.S. CPSC April 29, 2008	DEWALT Recalls Table Saws Due to Laceration Hazard The pivot bracket on the saw can separate which can misalign the blade and the fence and cause kick back. This poses a laceration hazard to consumers.
U.S. CPSC February 10, 2009	Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard.
U.S. CPSC January 10, 2008	Torchiere Lamps Recalled By L G Sourcing Due to Fire Hazard; Lamps Sold Exclusively At Lowe's Stores A short circuit in the lamps' wiring can pose a fire hazard to consumers.
U.S. CPSC August 15, 2007	Robert Bosch Tool Corp. Recalls Skil(r) Circular Saws Due to Laceration Hazard The trigger switch on the saw can be locked "on," or the switch can be turned on, without the use of the safety lock-out. This can cause unexpected operation of the saw, posing a risk of laceration.
U.S. CPSC August 19, 2009	Ridgid Table Saws Sold Exclusively at Home Depot Recalled by One World Technologies Due to Laceration Hazard The table saw's arbor shaft can fail when used with a stacked blade set (commonly known as a "stacked dado set"), which is used to cut grooves. The stacked blade set can be ejected from the saw, posing a potential laceration hazard to consumers.
U.S. CPSC October 2, 2003	Technuity Inc. Recall of Back-Up Power Supply Systems When used in conjunction with another power protection device, the power supply device can spark, posing a fire hazard to consumers.
U.S. CPSC November 30, 2004	Classic Sport Companies Inc. Recall of Table Soccer Games The lighting structures may spark if the tube lights are not properly installed, posing a fire hazard.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC November 20, 2008	ImagiPLAY Recalls Bead Maze Toys Due to Laceration Hazard The trees on the toys can detach, exposing a metal screw. This poses a laceration hazard to young children.
U.S. CPSC August 20, 2009	Pensi Ceiling Fans Recalled by The Modern Fan Co. Due to Fall and Injury Hazard The internal coupler that connects the down rod assembly to the motor can break and cause the fan to fall from the ceiling, posing an injury hazard to consumers.
U.S. CPSC July 25, 2006	Children's Lamp Sold at The Home Depot(R) Recalled for Laceration Hazard The glass window of the fire truck and bulldozer night light can become dislodged, fall and shatter into small pieces. This poses a laceration hazard and a serious risk of injury if ingested by a small child.
U.S. CPSC May 9, 2007	Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure.
U.S. CPSC September 25, 2003	Ceiling Fans Recalled by Vaxcel International Co. Ltd. About 80 of these units were improperly assembled with a metal sleeve that could cause exposed wiring. If this occurs, consumers are at an increased risk of receiving an electrical shock during installation or removal.
U.S. CPSC August 4, 2004	Osram Sylvania Products Recall of Decorative Light Bulbs The glass bulb can separate from its base and break during use. The broken glass can present a laceration injury to consumers, the hot broken bulb can present a burn injury to consumers, and an exposed bulb filament can present a shock hazard if handled while power remains applied to the fixture.
U.S. CPSC September 8, 2009	Bandsaws Recalled by Grizzly Industrial Due to Shock Hazard Some of the recalled bandsaws do not have a grounding wire installed, which poses an electric shock hazard to consumers.
U.S. CPSC November 8, 2006	WMH Tool Group Inc. Recalls Wilton Mitre Saws for Laceration Hazard The blade assembly could unexpectedly break free from the stationary base, posing a laceration hazard to consumers.
U.S. CPSC December 11, 2008	Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers.
U.S. CPSC December 12, 2007	Fishing Games Sold at Grocery Stores Recalled by Far East Brokers Due to Violation of Lead Paint Standard The recalled game has parts that contain excessive levels of lead, violating the federal lead paint standard.
U.S. CPSC November 18, 2008	Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers.
U.S. CPSC March 13, 2007	Toys "R" Us Recalls "Elite Operations" Toy Sets Due to Lead and Laceration Hazards These toys contain high levels of lead in the paint, which is toxic if ingested by young children. Also, the toys have sharp points, posing a laceration hazard.
U.S. CPSC August 13, 2004	Vaxcel International Second Recall of Ceiling Fans These ceiling fans were assembled without the proper wire insulation sleeving, which could result in exposed wiring. Consumers could receive an electrical shock during installation or removal.
U.S. CPSC June 5, 2003	Children's Art Supply Sets Recalled by Creative Kids Inc. The sets contain mini-cutters with razor blades which pose a laceration hazard to young children.
U.S. CPSC March 17, 2004	APA Marketing Inc. Recall of Home Entertainment Wall Units The control box for the touch dimmer lighting mechanism can overheat, posing a fire hazard to consumers.
U.S. CPSC March 1, 2005	Ginger Recall of Bathroom Light Fixtures The glass shades can separate from the light fixture, posing a risk that a consumer could be cut by the broken glass if the shade were to fall and break.