Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC March 3, 2010	Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC August 7, 2008	Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers.
U.S. CPSC June 10, 2008	Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC February 10, 2004	Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC February 15, 2005	Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC March 31, 2009	Clothing Irons Recalled by Conair Corporation Due to Fire Hazard The clothing iron can overheat, posing a fire hazard to consumers.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC June 15, 2004	Basler Electric Co. and Lutron Electronics Recall of Power Supply Units The power supply, if overloaded, can overheat, posing a fire hazard to consumers.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC August 18, 2009	Black & Decker Coffeemakers Recalled By Applica Consumer Products Due to Burn Hazard The coffeemakers can overheat and melt, posing a burn hazard to consumers.
U.S. CPSC December 18, 2003	Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC March 11, 2010	Noncontact Electrical Tester Recalled by Fluke Due to Shock or Burn Hazard The testers can fail to give an indication of live voltage, resulting in the operator falsely believing the electrical power is off, posing a risk of serious injury or death from electrical shock or thermal burns.
U.S. CPSC October 2, 2003	Technuity Inc. Recall of Back-Up Power Supply Systems When used in conjunction with another power protection device, the power supply device can spark, posing a fire hazard to consumers.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC November 18, 2008	Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers.
U.S. CPSC March 21, 2007	Home Decorators Collection Recalls Wall Sconces Due to Electrical Shock Hazard A missing back plate exposes consumers to live wires, posing a risk of electrical shock to consumers changing the light bulb.
U.S. CPSC April 29, 2009	HMI Industries Recalls Floor Cleaners Due to Burn Hazard The recalled cleaners' wiring can overheat, causing electrical arcing and melting. This poses a burn hazard to consumers.
U.S. CPSC June 27, 2008	Hewlett-Packard Co. Recalls Fax Machines Due to Fire Hazard An internal electrical component failure can cause overheating of the product posing a risk of burn or fire.
U.S. CPSC June 30, 2010	Southern Technologies Recalls Drill Presses Due to Shock Hazard Wires in the motor housing can be pinched, posing a risk of electrical shock to the consumer.
U.S. CPSC August 22, 2008	Power Light Modules Recalled by GCI Technologies Due to Fire and Burn Hazards Internal wiring in the module's circuit boards is incorrectly installed, posing a risk of an electrical fire and burn hazards to consumers.
U.S. CPSC October 5, 2007	P3 International Recalls IonizAir(TM) Air Purifiers Due to Risk of Fire The air purifier's cartridge can overheat, posing a risk of fire.
U.S. CPSC February 10, 2009	Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard.
U.S. CPSC August 20, 2009	Pensi Ceiling Fans Recalled by The Modern Fan Co. Due to Fall and Injury Hazard The internal coupler that connects the down rod assembly to the motor can break and cause the fan to fall from the ceiling, posing an injury hazard to consumers.
U.S. CPSC February 15, 2006	Espresso Makers Recalled Due to Fire Hazard The electrical connectors in the espresso machine can erode, posing a fire hazard.
U.S. CPSC December 13, 2007	Venmar Ventilation Inc. Recalls Heat Recovery Ventilators Due to Fire Hazard The thermal protector in these units can fail, posing a potential fire hazard to consumers.
U.S. CPSC September 3, 2008	Cordless Screwdrivers Recalled by Menards Due to Fire and Burn Hazards The battery can overheat and ignite during charging, posing a fire and burn hazard to consumers. There is no protective device on the lithium battery to prevent overheating.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC March 30, 2006	Espresso Machines Recalled for Fire Hazard Jura Impressa Automatic Coffee Center Espresso Machines are being recalled because the electrical connectors in the machine can erode, posing a fire hazard.
U.S. CPSC August 30, 2007	Electric Heaters Recalled by Aloha Housewares Due to Fire Hazard The heater can overheat, posing a fire hazard.
U.S. CPSC May 9, 2007	Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure.
U.S. CPSC January 12, 2010	Lenmar Enterprises Recalls Rechargeable Batteries Sold for Cordless Phones Due to Fire and Burn Hazards The rechargeable batteries can overheat, posing a fire and burn hazard to consumers.
U.S. CPSC March 3, 2009	Frontrow Recalls to Replace Rechargeable Batteries Sold with PA System Microphones Due to Burn Hazard The batteries can rapidly overheat, posing a burn hazard to the user.
U.S. CPSC November 4, 2004	Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings.
U.S. CPSC June 17, 2009	Campbell Hausfeld Recalls Air Compressors Due to Fire Hazard; Sold Exclusively at Wal-Mart The compressor's thermal overload, which shuts the unit off when it overheats, can fail. This can lead to overheating, melting of parts and a risk of fire.
U.S. CPSC August 28, 2007	Wolverine Recalls Caterpillar Logger Boots; Can Pose Shock Hazard To User Due to Mislabeling The recalled logger boots could be incorrectly labeled as resistant to electrical current. This poses a shock hazard to consumers who come in contact with an electrical current.
U.S. CPSC December 11, 2008	Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers.