Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC June 10, 2008	Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC July 22, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire.
U.S. CPSC August 7, 2008	Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC November 6, 2001	Progress Lighting Recall Fluorescent Lights The lights are improperly wired, posing a fire hazard.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC March 3, 2010	Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers.
U.S. CPSC December 18, 2003	Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks.
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC February 15, 2005	Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC August 16, 2006	Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC February 9, 2011	AmerTac Recalls Night Lights Due to Fire and Burn Hazard An electrical short circuit in the night light can cause it to overheat and smolder or melt, which can burn consumers or result in fire.
U.S. CPSC November 30, 2004	Classic Sport Companies Inc. Recall of Table Soccer Games The lighting structures may spark if the tube lights are not properly installed, posing a fire hazard.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC September 20, 2006	Advantus Corp. Recalls Desk Lamps Due to Burn Hazard The plastic near the bulb of these lamps can overheat and melt, posing a burn hazard to consumers who touch the hot plastic.
U.S. CPSC November 4, 2004	Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings.
U.S. CPSC December 8, 2004	Technical Consumer Products Inc. Recall of Fluorescent Light Bulbs The bulbs can overheat and spark, posing a burn hazard to consumers.
U.S. CPSC February 10, 2009	Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard.
U.S. CPSC December 11, 2008	Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC November 2, 2010	AmerTac Recalls Night Lights Due to Fire and Burn Hazard An electrical short circuit in the night light can cause it to overheat and smolder or melt which can burn consumers or result in a fire.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC March 1, 2006	Big Lots Stores Inc. Recall Tea Light Candles for Fire Hazard The recalled candles can burn with a high flame and melt the plastic holders. This poses a fire and a burn hazard to consumers.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC November 18, 2008	Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers.
U.S. CPSC April 3, 2007	Mastex Recalls Foot Warmer Due to Burn Hazard The wiring in the foot warmer has a defect which can cause it to overheat. This poses a burn hazard to consumers.
U.S. CPSC December 6, 2007	Collins International Co. Recalls Oscillating Ceramic Heaters Sold at Menards Retail Stores Due To Fire Hazard The heaters can overheat, smoke, or ignite which could pose a fire hazard to consumers.
U.S. CPSC April 29, 2009	HMI Industries Recalls Floor Cleaners Due to Burn Hazard The recalled cleaners' wiring can overheat, causing electrical arcing and melting. This poses a burn hazard to consumers.
U.S. CPSC August 17, 2006	Lands' End Children's Light-Up Backpacks Recalled for Overheating The backpack's battery pack can overheat causing the battery case to melt, presenting a burn hazard if touched.
U.S. CPSC May 9, 2007	Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure.
U.S. CPSC June 15, 2004	Basler Electric Co. and Lutron Electronics Recall of Power Supply Units The power supply, if overloaded, can overheat, posing a fire hazard to consumers.
U.S. CPSC January 25, 2007	Sally Foster Inc. Recalls Tea Lights Candles for Fire Hazard The tea light candles have a clear, plastic shell that can melt or ignite, posing a fire or burn hazard to consumers.
U.S. CPSC December 8, 2009	Goodman Company Reannounces Recall of Air Conditioner/Heat Pump Units Due to Fire Hazard The power cords on the PTACs can overheat, posing a burn or fire hazard.
U.S. CPSC February 12, 2008	Christmas Tree Shops Recalls Tea Light Candles Due to Fire Hazard The tea light candles have a clear, plastic shell that can melt or ignite, posing a fire and burn hazard to consumers.
U.S. CPSC January 24, 2005	Research Products Corp. Recall of Electronic Air Cleaners The air cleaner's plastic inner housing and filter are not flame-resistant. If electrical arcing occurs in the cleaner, a fire can develop. This poses a risk of burn injuries and property damage.
U.S. CPSC June 4, 2002	Portable Fluorescent Lamps Recalled by Luxo Corp. The ballast (the electrical part located in the arm of the lamp) in these lamps can overheat, short-circuit, and melt the insulating cover of the ballast causing the lamp to fail and posing a skin burn hazard to consumers.
U.S. CPSC January 12, 2010	Lenmar Enterprises Recalls Rechargeable Batteries Sold for Cordless Phones Due to Fire and Burn Hazards The rechargeable batteries can overheat, posing a fire and burn hazard to consumers.
U.S. CPSC November 9, 2005	Target Recall of Tea Light Candles The recalled candles can burn with a high flame and melt the plastic holders. This poses a fire hazard and a burn hazard to consumers.
U.S. CPSC January 5, 2007	Family Dollar Stores Recalls Oscillating Ceramic Heater for Fire Hazard The heaters can overheat and smoke, which could pose a fire hazard to consumers.