Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC June 10, 2008	Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC July 22, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC February 10, 2004	Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard.
U.S. CPSC March 3, 2010	Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC February 15, 2005	Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC November 4, 2004	Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings.
U.S. CPSC August 20, 2009	Pensi Ceiling Fans Recalled by The Modern Fan Co. Due to Fall and Injury Hazard The internal coupler that connects the down rod assembly to the motor can break and cause the fan to fall from the ceiling, posing an injury hazard to consumers.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC December 11, 2008	Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC November 6, 2001	Progress Lighting Recall Fluorescent Lights The lights are improperly wired, posing a fire hazard.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC February 10, 2009	Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard.
U.S. CPSC August 19, 2009	Ridgid Table Saws Sold Exclusively at Home Depot Recalled by One World Technologies Due to Laceration Hazard The table saw's arbor shaft can fail when used with a stacked blade set (commonly known as a "stacked dado set"), which is used to cut grooves. The stacked blade set can be ejected from the saw, posing a potential laceration hazard to consumers.
U.S. CPSC June 3, 2004	Electrolux Home Products Recall of Air Conditioning/Heating Units The heating coil in the units can be damaged during assembly, causing an electrical short and overheating, which poses a fire hazard to consumers.
U.S. CPSC January 4, 2005	The Step 2 Co. Recall to Repair Toddler Swings The straps on these swings could break, causing a child riding in the swing to fall to the ground and suffer injuries.
U.S. CPSC December 18, 2003	Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks.
U.S. CPSC September 30, 2008	IKEA Recalls to Repair Chest of Drawers Due to Laceration Hazard The glass drawer knobs on the chest can break either during assembly or in use, posing a laceration hazard to consumers.
U.S. CPSC March 17, 2004	APA Marketing Inc. Recall of Home Entertainment Wall Units The control box for the touch dimmer lighting mechanism can overheat, posing a fire hazard to consumers.
U.S. CPSC October 4, 2007	Dollar General Recalls Tumblers Due to Violation of Lead Paint Standard Surface paint on the center of the eyes of some of the cups can contain high levels of lead, violating the federal lead paint standard.
U.S. CPSC May 9, 2007	Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure.
U.S. CPSC April 24, 2003	DesignPac Inc. Recall of Oil Lamps The glass wick holder can shatter when lit, posing a fire hazard.
U.S. CPSC July 3, 2008	Outdoor Canopies Sold Exclusively at BJ's Wholesale Club Recalled by Wanda Technology Due to Fire Hazard The canopies fail to comply with a voluntary flammability standard could pose a fire hazard to consumers.
U.S. CPSC October 2, 2003	Technuity Inc. Recall of Back-Up Power Supply Systems When used in conjunction with another power protection device, the power supply device can spark, posing a fire hazard to consumers.
U.S. CPSC August 4, 2004	Osram Sylvania Products Recall of Decorative Light Bulbs The glass bulb can separate from its base and break during use. The broken glass can present a laceration injury to consumers, the hot broken bulb can present a burn injury to consumers, and an exposed bulb filament can present a shock hazard if handled while power remains applied to the fixture.
U.S. CPSC October 27, 2009	Belkin International Inc. Recalls SurgeMaster Surge Protectors Due to Shock Hazard The molding of the plastic 360 degree rotating plug, which allows for easy cord movement, can crack or detach from the plug assembly, posing a shock hazard to consumers.
U.S. CPSC August 16, 2006	Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast.
U.S. CPSC April 7, 2009	Simplicity Play Yards Recalled by Various Retailers Due to Fall and Entrapment Hazards One or more rails can collapse unexpectedly, posing a fall or entrapment hazard to young children.
U.S. CPSC August 22, 2008	Power Light Modules Recalled by GCI Technologies Due to Fire and Burn Hazards Internal wiring in the module's circuit boards is incorrectly installed, posing a risk of an electrical fire and burn hazards to consumers.
U.S. CPSC March 1, 2005	Ginger Recall of Bathroom Light Fixtures The glass shades can separate from the light fixture, posing a risk that a consumer could be cut by the broken glass if the shade were to fall and break.
U.S. CPSC November 30, 2004	Classic Sport Companies Inc. Recall of Table Soccer Games The lighting structures may spark if the tube lights are not properly installed, posing a fire hazard.
U.S. CPSC August 3, 2007	LED Lights Recalled by Plan 9 Due to Fire Hazard The circuit board in the lights can overheat, posing a risk of fire.
U.S. CPSC April 6, 2006	Computer Desk Set Sold at Office Depot Recalled Due to Risk of Falls The seat on the chair can break and fall through during use causing an individual to fall and suffer injuries.
U.S. CPSC May 20, 2008	The Home Depot Recalls Candle Holders Due to Fire Hazard Sunlight passing through the glass portion can cause nearby flammable materials to ignite, posing a fire hazard.
U.S. CPSC August 15, 2007	Robert Bosch Tool Corp. Recalls Skil(r) Circular Saws Due to Laceration Hazard The trigger switch on the saw can be locked "on," or the switch can be turned on, without the use of the safety lock-out. This can cause unexpected operation of the saw, posing a risk of laceration.