Similar Articles |
|
U.S. CPSC August 27, 2008 |
Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture. |
U.S. CPSC August 7, 2008 |
Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers. |
U.S. CPSC July 22, 2008 |
Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire. |
U.S. CPSC March 3, 2010 |
Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers. |
U.S. CPSC June 10, 2008 |
Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers. |
U.S. CPSC February 15, 2005 |
Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks. |
U.S. CPSC March 19, 2008 |
Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons. |
U.S. CPSC August 12, 2008 |
Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency. |
U.S. CPSC October 9, 2007 |
Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers. |
U.S. CPSC November 21, 2007 |
Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers. |
U.S. CPSC March 11, 2005 |
Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture. |
U.S. CPSC May 22, 2003 |
Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers. |
U.S. CPSC September 23, 2008 |
Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency. |
U.S. CPSC May 23, 2006 |
Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers. |
U.S. CPSC September 12, 2005 |
DOLMAR Power Products Recall of Chain Saws The flywheels on some of the chain saws may come apart during use, which could cause serious personal injury. |
U.S. CPSC May 9, 2007 |
Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure. |
U.S. CPSC October 25, 2006 |
Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures. |
U.S. CPSC March 29, 2004 |
Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture. |
U.S. CPSC October 30, 2008 |
Homelite Consumer Products Announce Recall to Repair Chain Saws Due to Chain Brake Failure The chain brake can fail to stop the chain on its first application, posing a risk of laceration to consumers. |
U.S. CPSC February 10, 2004 |
Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard. |
U.S. CPSC August 15, 2006 |
Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers. |
U.S. CPSC December 28, 2006 |
Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60. |
U.S. CPSC March 8, 2005 |
Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture. |
U.S. CPSC April 6, 2011 |
Stained Glass Soldering Irons Recalled By Cooper Tools Due to Burn Hazard The power cord can break at the flex point where the cord attaches to the handle, posing a burn hazard to consumers. |
U.S. CPSC September 12, 2005 |
Makita U.S.A. Inc. Recall of Chain Saws The flywheels on some of the chain saws can come apart during use, which could cause serious personal injury. |
U.S. CPSC January 11, 2006 |
Stihl Inc. Recall of Chain Saws These chain saws can leak fuel, posing a fire hazard. |
U.S. CPSC November 4, 2004 |
Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings. |
U.S. CPSC August 9, 2011 |
Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency. |
U.S. CPSC December 29, 2006 |
Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62. |
U.S. CPSC August 20, 2009 |
Pensi Ceiling Fans Recalled by The Modern Fan Co. Due to Fall and Injury Hazard The internal coupler that connects the down rod assembly to the motor can break and cause the fan to fall from the ceiling, posing an injury hazard to consumers. |
U.S. CPSC February 3, 2010 |
Dollar General Recalls Toy Guns Due to Choking Hazard The orange tips located at the end of the toy guns' barrels, which are designed to distinguish them from real guns, can easily be removed from the barrels, posing a choking hazard to children. |
U.S. CPSC April 29, 2009 |
HMI Industries Recalls Floor Cleaners Due to Burn Hazard The recalled cleaners' wiring can overheat, causing electrical arcing and melting. This poses a burn hazard to consumers. |
U.S. CPSC April 3, 2007 |
Mastex Recalls Foot Warmer Due to Burn Hazard The wiring in the foot warmer has a defect which can cause it to overheat. This poses a burn hazard to consumers. |
U.S. CPSC November 17, 2005 |
Cooper Hand Tools Recall of Weller Heating Element used in Soldering Irons The housing of the heating element can unexpectedly leak hot metal, posing a serious risk of a burn injury to the user. |
U.S. CPSC January 4, 2005 |
The Step 2 Co. Recall to Repair Toddler Swings The straps on these swings could break, causing a child riding in the swing to fall to the ground and suffer injuries. |
U.S. CPSC June 19, 2008 |
Wal-Mart Recalls Additional Charm Key Chains Due to Risk of Lead Exposure The charms on the key chain can contain high levels of lead, which is toxic if ingested and can cause adverse health effects. |
U.S. CPSC May 10, 2006 |
Hoshino USA Inc. Recall to Repair Electric Bass If the battery is improperly installed, the bass can overheat causing internal damage and a fire hazard. |
U.S. CPSC August 21, 2003 |
Small World Toys Recall of Children's Puzzle One of the puzzle pieces (a stack of newspapers) poses a small parts choking hazard to young children. |
U.S. CPSC October 4, 2007 |
Dollar General Recalls Tumblers Due to Violation of Lead Paint Standard Surface paint on the center of the eyes of some of the cups can contain high levels of lead, violating the federal lead paint standard. |
U.S. CPSC April 18, 2008 |
Wal-Mart Recalls Charm Key Chains Due to Risk of Lead Exposure The charms on the key chain can contain high levels of lead, which is toxic if ingested and can cause adverse health effects. |
U.S. CPSC March 2, 2010 |
Children's Fork and Spoon Sets Recalled by Peachtree Playthings Due to Choking Hazard; Sold at Dollar Tree and Deals The middle two prongs of the plastic fork can detach, posing a choking hazard to children. |
U.S. CPSC September 27, 2006 |
Suave Kids Bath Sets Sold at Wal-Mart Recalled for Choking, Other Hazards Items in these baths sets contain part or components that pose choking, strangulation or suffocation hazards to young children. |
U.S. CPSC April 6, 2006 |
Computer Desk Set Sold at Office Depot Recalled Due to Risk of Falls The seat on the chair can break and fall through during use causing an individual to fall and suffer injuries. |
U.S. CPSC December 13, 2005 |
Kids II Inc. Recall of Doorway Baby Jumpers The plastic clamp that attaches the jumper seat to a door frame can break, which can cause the unit and child to fall to the floor. This poses an injury hazard to young children. |
U.S. CPSC August 16, 2006 |
Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast. |
U.S. CPSC December 11, 2008 |
Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers. |
U.S. CPSC August 3, 2007 |
LED Lights Recalled by Plan 9 Due to Fire Hazard The circuit board in the lights can overheat, posing a risk of fire. |
U.S. CPSC December 18, 2003 |
Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks. |
U.S. CPSC October 2, 2003 |
Technuity Inc. Recall of Back-Up Power Supply Systems When used in conjunction with another power protection device, the power supply device can spark, posing a fire hazard to consumers. |
U.S. CPSC February 12, 2009 |
Disney Store Recalls Toy Tool Sets Due to Choking Hazard The tools contain eyes that can separate, posing a choking hazard to young children. |