Similar Articles |
|
U.S. CPSC May 5, 2005 |
Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries. |
U.S. CPSC November 12, 2009 |
Bicycles Recalled by Easton Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC January 4, 2011 |
Salsa Cycles Recalls Handlebar Stems Due to Fall Hazard The handlebar stems can crack or break, posing a fall hazard to the rider. |
U.S. CPSC September 3, 2008 |
Bicycles with Deda Forza Handlebar Stems Recalled by Deda Elementi Due to Crash Hazard The top of the bicycle handlebar stem can crack and cause the rider to lose control, posing a crash hazard. |
U.S. CPSC February 26, 2009 |
Salsa Bicycles Recalls Bicycles; Handlebar Stems Can Break Causing Rider to Fall The handlebar stems can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC August 19, 2009 |
Bicycles Recalled by Nirve Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC June 22, 2006 |
Specialized Bicycle Components Inc. Recalls Bicycles Due to Fall Hazard The bicycle's stem has a magnesium faceplate that holds the handlebar in place. The faceplates on the recalled stems can crack allowing the handlebar to break off the bicycle, posing a serious fall hazard. |
U.S. CPSC June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC December 23, 2008 |
Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash. |
U.S. CPSC July 25, 2005 |
VisionTech USA, Inc. Recall of Bicycle Aero Bars The centerpiece of these bicycle aero bars can crack or break, causing the bicycle rider to lose control and crash. |
U.S. CPSC September 29, 2004 |
Specialized Bicycle Components Inc. Recall of Bicycles The handlebar may loosen and turn unexpectedly, which can cause the rider to lose control and fall. |
U.S. CPSC May 5, 2010 |
Bicycles Recalled by Nirve Sports Due to Fall Hazard The bicycle stem on the handlebars can crack and cause the rider to lose control, posing a risk of serious fall and injury. |
U.S. CPSC October 16, 2007 |
Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
U.S. CPSC May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC January 6, 2009 |
Bicycles with RockShox Bicycle Forks Recalled by SRAM LLC Due to Crash Hazard The steel steerer on the forks can crack, causing the fork to detach from the bicycle frame. This can cause the rider to lose control and crash. |
U.S. CPSC March 28, 2007 |
Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC October 2, 2003 |
Park Tool USA Recalls Bicycle Floor Pump The bicycle pump can become over-pressurized with air, forcing the handle to quickly and unexpectedly rise upward, possibly injuring the user. |
U.S. CPSC October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC May 19, 2009 |
Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC October 16, 2007 |
Formula Brake USA Recalls Disc Brakes for Bicycles Due to Risk of Failure The brake's hand lever can separate, resulting in loss of braking. This can cause the rider to lose control of the bicycle, posing a risk of injury to riders. |
U.S. CPSC August 2, 2005 |
Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack. |
U.S. CPSC September 8, 2009 |
Bicycle Chains and Chain Connector Links Recalled by SRAM Due to Fall Hazard The recalled PowerLock connector links, used on bicycle chains, are brittle and can crack, allowing the chain to separate from the bicycle and posing a fall hazard to the rider. |
U.S. CPSC August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC July 22, 2008 |
Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC June 21, 2005 |
FF Acquisition Wheeled Goods Corp. Recall of Go-Karts The suspension assembly can crack causing the rider to lose control of the go-kart. |
U.S. CPSC August 3, 2007 |
Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC February 27, 2007 |
Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall. |
U.S. CPSC September 22, 2004 |
Performance Inc. and Supergo Inc. Recall of Bicycle Handlebars The handlebars can develop cracks that may not be visible, which can cause the handlebar to break without warning, resulting in serious injury or death. |
U.S. CPSC June 8, 2011 |
Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider. |
U.S. CPSC April 21, 2009 |
Specialized Bicycle Components Recalls Bicycles Due to Serious Fall Hazard The handlebars can break, posing a fall hazard to the rider. |
U.S. CPSC February 10, 2009 |
Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash. |
U.S. CPSC July 13, 2010 |
Seattle Bike Supply Recalls Bicycles and Framesets Due to Fall Hazard The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury. |
U.S. CPSC July 31, 2003 |
Cervelo Cycles Inc. Bicycle Fork Recall The forks on the bicycles can develop cracks near the crown area resulting in failure of the fork and posing a risk of injury to the rider. |
U.S. CPSC August 15, 2002 |
Bicycles With Defective Stems Recalled by Cannondale Corp. The stem can break away from the bicycle, causing a loss of control, falls and serious injury to riders. |
U.S. CPSC August 19, 2008 |
Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC November 12, 2010 |
Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders. |
U.S. CPSC March 11, 2005 |
CF Roark Welding & Engineering Recall of Bicycle Frames The frames on these bicycles can crack and fail during use, posing a risk of injury to riders. |
U.S. CPSC November 2, 2004 |
Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists. |
U.S. CPSC July 7, 2006 |
Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall. |
U.S. CPSC July 18, 2007 |
Brake Cylinder Recalled By Magura USA for Brake Failure Hazard on Off-Road Motorcycles The brake cylinder on the off-road motorcycle can crack and result in brake failure. This poses a risk of severe injury or death to the driver. |
U.S. CPSC December 18, 2007 |
Bicycle Helmets Recalled by Specialized Due to Failing Helmet Standard The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall. |
U.S. CPSC December 9, 2010 |
Seattle Bike Supply Recalls Redline Bicycles Due to Fall Hazard The head tube can separate from the frame, causing the rider to lose control and fall. This poses a risk of serious injury. |
U.S. CPSC January 14, 2009 |
Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer. |
U.S. CPSC October 14, 2010 |
The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist. |
U.S. CPSC August 17, 2006 |
Target Recalls Scooters -- Various Breaking Parts Present Fall Hazard The handlebars, wheels and wheel brakes can break and detach, causing the rider to lose control, fall and possibly suffer injuries. |