Similar Articles |
|
U.S. CPSC June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC November 12, 2010 |
Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders. |
U.S. CPSC August 19, 2009 |
Bicycles Recalled by Nirve Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC January 14, 2009 |
Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer. |
U.S. CPSC October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC March 28, 2007 |
Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC March 11, 2005 |
CF Roark Welding & Engineering Recall of Bicycle Frames The frames on these bicycles can crack and fail during use, posing a risk of injury to riders. |
U.S. CPSC July 22, 2008 |
Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC July 7, 2006 |
Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall. |
U.S. CPSC August 2, 2005 |
WaveCrest Laboratories LLC Recall of Electric Bicycles The front and/or rear wheel can collapse, causing the rider to fall and suffer injuries. |
U.S. CPSC February 27, 2007 |
Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall. |
U.S. CPSC August 19, 2008 |
Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC May 5, 2010 |
Bicycles Recalled by Nirve Sports Due to Fall Hazard The bicycle stem on the handlebars can crack and cause the rider to lose control, posing a risk of serious fall and injury. |
U.S. CPSC May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC January 9, 2007 |
Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall. |
U.S. CPSC August 3, 2007 |
Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC March 17, 2009 |
Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider. |
U.S. CPSC September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC October 16, 2007 |
Procycle Group Inc. Recalls Bicycles Due to Fall Hazard The head tube can detach from the rest of the frame, posing a fall hazard to consumers. |
U.S. CPSC February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
U.S. CPSC March 11, 2009 |
Electra Bicycle Company Recalls Bicycles with Front Trays; Trays Can Come Loose and Pose Fall Hazard to Riders The front tray on the bicycle can come loose and contact the front tire, posing a fall hazard to riders. |
U.S. CPSC May 19, 2009 |
Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC September 2, 2004 |
World Wide Cycle Supply Inc. Recall of Bicycles Sold at Toys "R" Us The fork that holds the front wheel can separate at the weld, causing the rider to fall and suffer injuries. |
U.S. CPSC May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC April 8, 2010 |
Civia Cycles Recalls Bicycle Forks Due to Fall Hazard The bicycle fork can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC April 2, 2004 |
Pacific Cycle Inc. Recall of Mongoose 20-Inch Mountain Bicycles The rear shock absorber allows the aluminum, dual-suspension frame to flex severely, causing the frame to become unstable and break, posing the risk of injury to riders. |
U.S. CPSC June 20, 2005 |
Nashbar Direct Recall of Bicycle Trailers The bicycle trailers can become unstable when changing directions due to incorrectly assembled hitch mechanisms, posing a risk of injury to the riders. |
U.S. CPSC November 12, 2009 |
Bicycles Recalled by Easton Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC July 6, 2005 |
Rolf Prima Inc. Recall of Bicycle Wheels The rear wheel freehub mechanism can malfunction causing no resistance when pedaling. The bicycle rider could lose balance, fall and suffer injuries. |
U.S. CPSC October 16, 2007 |
Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC April 25, 2002 |
Bicycles Recalled by Specialized Bicycle Components Inc. The rear seatstays, the tube behind the seat that connects the rear axle to the rear shock, can break, possibly causing the rider to lose control and crash... |
U.S. CPSC November 2, 2004 |
Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists. |
U.S. CPSC December 18, 2007 |
Bicycle Helmets Recalled by Specialized Due to Failing Helmet Standard The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall. |
U.S. CPSC September 18, 2007 |
REI Recalls Children's Trailer Bicycles; Can Detach from Adult Bicycle and Injure Children The children's trailer bicycle can detach from the adult bicycle, posing a fall hazard to children. |
U.S. CPSC August 11, 2005 |
Ritchey Design Inc. Recall of Bicycle Wheels The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider can lose balance, fall and suffer injuries. |
U.S. CPSC April 21, 2009 |
Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The cable stop on the bicycle can loosen, which can cause the rider to lose control and fall from the bike. |
U.S. CPSC January 8, 2008 |
Cannondale Recalls Scalpel Mountain Bikes; Frame Failure Poses Crash Hazard The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC January 19, 2006 |
Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury. |
U.S. CPSC February 18, 2005 |
Cannondale Bicycle Corporation Recall of Bicycle Suspension Seat Posts The seat posts may have been improperly manufactured, which could cause the seat post to fail prematurely. A failure could lead to a crack in the bicycle seat post, which may cause the rider to fall or crash. |
U.S. CPSC July 12, 2006 |
Shimano American Corp. Recalls Quick-Release Device for Bicycles Posing Fall Hazard The quick release skewers can unexpectedly fail or break when locked in position. When this happens the rider could lose control and fall. |
U.S. CPSC November 20, 2001 |
Raleigh America Recall Bicycles The bottom bracket spindle inside the crankset of the bicycle can break, causing the rider to lose control and crash. |
U.S. CPSC July 7, 2010 |
Campus Cruisers Recalls Bicycles Due to Front Fork Failure The bicycle's front fork can crack or break, causing a sudden loss of steering control and posing a fall hazard to bicyclists. |
U.S. CPSC October 16, 2007 |
Formula Brake USA Recalls Disc Brakes for Bicycles Due to Risk of Failure The brake's hand lever can separate, resulting in loss of braking. This can cause the rider to lose control of the bicycle, posing a risk of injury to riders. |
U.S. CPSC December 23, 2008 |
Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash. |
U.S. CPSC August 19, 2009 |
Burley Design Recalls Child Trailers Due to Risk of Injury The axle assembly's internal sleeve can loosen, causing one wheel to separate from the trailer. This poses a risk of injury to the child occupant or bike rider. |
U.S. CPSC June 8, 2011 |
Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider. |
U.S. CPSC June 30, 2010 |
Felt Bicycles Recalls Bicycles Due to Fall Hazard The bicycle's fork steer tube can break, causing the rider to lose control, fall and suffer injuries. |