Similar Articles |
|
U.S. CPSC September 29, 2004 |
Specialized Bicycle Components Inc. Recall of Bicycles The handlebar may loosen and turn unexpectedly, which can cause the rider to lose control and fall. |
U.S. CPSC September 3, 2008 |
Bicycles with Deda Forza Handlebar Stems Recalled by Deda Elementi Due to Crash Hazard The top of the bicycle handlebar stem can crack and cause the rider to lose control, posing a crash hazard. |
U.S. CPSC May 5, 2005 |
Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries. |
U.S. CPSC January 4, 2011 |
Salsa Cycles Recalls Handlebar Stems Due to Fall Hazard The handlebar stems can crack or break, posing a fall hazard to the rider. |
U.S. CPSC November 12, 2009 |
Bicycles Recalled by Easton Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC January 19, 2006 |
Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury. |
U.S. CPSC April 21, 2009 |
Specialized Bicycle Components Recalls Bicycles Due to Serious Fall Hazard The handlebars can break, posing a fall hazard to the rider. |
U.S. CPSC April 21, 2009 |
Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The cable stop on the bicycle can loosen, which can cause the rider to lose control and fall from the bike. |
U.S. CPSC February 26, 2009 |
Salsa Bicycles Recalls Bicycles; Handlebar Stems Can Break Causing Rider to Fall The handlebar stems can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC December 18, 2007 |
Bicycle Helmets Recalled by Specialized Due to Failing Helmet Standard The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall. |
U.S. CPSC November 12, 2010 |
Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders. |
U.S. CPSC August 19, 2009 |
Bicycles Recalled by Nirve Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC December 10, 2003 |
Brake Rotors On Mountain Bikes Recalled by Specialized During heavy braking, the brake tabs on the front forks could break off, possibly causing a loss of control and fall from the bicycle. |
U.S. CPSC September 22, 2011 |
Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard. |
U.S. CPSC January 22, 2009 |
Saris Cycling Group Recalls Stationary Bicycle Trainers Due to Fall Hazard A handle pin on the bicycle trainer can loosen during use, causing the machine to become disengaged, and pose a fall hazard to consumers. |
U.S. CPSC May 5, 2010 |
Bicycles Recalled by Nirve Sports Due to Fall Hazard The bicycle stem on the handlebars can crack and cause the rider to lose control, posing a risk of serious fall and injury. |
U.S. CPSC January 14, 2009 |
Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer. |
U.S. CPSC April 8, 2010 |
Civia Cycles Recalls Bicycle Forks Due to Fall Hazard The bicycle fork can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC October 28, 2010 |
Bicycles Recalled by Easton Sports; Seat Post Poses Fall Hazard The carbon top clamp of the seat post can crack, posing a fall hazard to the user. |
U.S. CPSC October 14, 2010 |
The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist. |
U.S. CPSC March 17, 2009 |
Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider. |
U.S. CPSC March 28, 2007 |
Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC September 22, 2004 |
Performance Inc. and Supergo Inc. Recall of Bicycle Handlebars The handlebars can develop cracks that may not be visible, which can cause the handlebar to break without warning, resulting in serious injury or death. |
U.S. CPSC May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC August 2, 2005 |
Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack. |
U.S. CPSC May 5, 2010 |
Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The shock absorber mount can break and the shock absorber can make contact with the wheel spokes, posing a fall hazard to the rider. |
U.S. CPSC September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC July 7, 2010 |
Campus Cruisers Recalls Bicycles Due to Front Fork Failure The bicycle's front fork can crack or break, causing a sudden loss of steering control and posing a fall hazard to bicyclists. |
U.S. CPSC February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
U.S. CPSC July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC August 3, 2007 |
Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC March 11, 2009 |
Electra Bicycle Company Recalls Bicycles with Front Trays; Trays Can Come Loose and Pose Fall Hazard to Riders The front tray on the bicycle can come loose and contact the front tire, posing a fall hazard to riders. |
U.S. CPSC February 4, 2009 |
Bicycles with R-SYS Wheel Rims Recalled by Mavic USA Due to Crash Hazard The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders. |
U.S. CPSC July 22, 2008 |
Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC May 19, 2009 |
Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC October 16, 2007 |
Procycle Group Inc. Recalls Bicycles Due to Fall Hazard The head tube can detach from the rest of the frame, posing a fall hazard to consumers. |
U.S. CPSC January 9, 2007 |
Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall. |
U.S. CPSC August 15, 2002 |
Bicycles With Defective Stems Recalled by Cannondale Corp. The stem can break away from the bicycle, causing a loss of control, falls and serious injury to riders. |
U.S. CPSC May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC August 19, 2008 |
Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC October 14, 2009 |
Moser Enterprises Recalls Schwalbe Brand Bicycle Tires Due to Fall Hazard The tire layers could separate causing the inner tube to rupture, posing a fall hazard to consumers. |
U.S. CPSC May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC September 8, 2009 |
Bicycle Chains and Chain Connector Links Recalled by SRAM Due to Fall Hazard The recalled PowerLock connector links, used on bicycle chains, are brittle and can crack, allowing the chain to separate from the bicycle and posing a fall hazard to the rider. |
U.S. CPSC July 25, 2005 |
VisionTech USA, Inc. Recall of Bicycle Aero Bars The centerpiece of these bicycle aero bars can crack or break, causing the bicycle rider to lose control and crash. |
U.S. CPSC June 8, 2011 |
Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider. |
U.S. CPSC February 27, 2007 |
Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall. |
U.S. CPSC July 13, 2010 |
Seattle Bike Supply Recalls Bicycles and Framesets Due to Fall Hazard The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury. |