Similar Articles |
|
U.S. CPSC February 10, 2004 |
Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard. |
U.S. CPSC June 10, 2008 |
Progress Lighting Recalls Ceiling-Mounted Indoor Light Fixtures; Lights Can Fall Posing an Impact Hazard A cable that supports the light fixture from the ceiling can fail, causing the fixture to fall and injure nearby consumers. |
U.S. CPSC September 23, 2008 |
Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency. |
U.S. CPSC March 19, 2008 |
Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons. |
U.S. CPSC August 7, 2008 |
Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers. |
U.S. CPSC May 22, 2003 |
Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers. |
U.S. CPSC December 20, 2001 |
Flora-Lite Recalls Christmas Light Sets The lights' wires can be easily pulled out of the plugs and light sockets. The lights could pose electrocution and electric shock hazards to consumers and could pose a fire hazard... |
U.S. CPSC July 22, 2008 |
Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire. |
U.S. CPSC November 21, 2007 |
Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers. |
U.S. CPSC August 12, 2008 |
Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency. |
U.S. CPSC February 9, 2011 |
AmerTac Recalls Night Lights Due to Fire and Burn Hazard An electrical short circuit in the night light can cause it to overheat and smolder or melt, which can burn consumers or result in fire. |
U.S. CPSC October 9, 2007 |
Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers. |
U.S. CPSC December 28, 2006 |
Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60. |
U.S. CPSC November 30, 2004 |
Classic Sport Companies Inc. Recall of Table Soccer Games The lighting structures may spark if the tube lights are not properly installed, posing a fire hazard. |
U.S. CPSC September 23, 2010 |
Molenaar LLC Recalls Night Lights Due to Fire and Shock Hazard The night lights can become hot to the touch and melt, resulting in risk of possible shock or fire. |
U.S. CPSC August 15, 2006 |
Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers. |
U.S. CPSC October 31, 2002 |
Snake Lights Recalled by Carlisle Co. The circuit board in the lamps can overheat and melt the plastic housing, posing a fire or thermal burn hazard to consumers. Chuck E. Cheese's restaurants nationwide provided the lights as a redemption prize from July 2002 through September 2002. |
U.S. CPSC March 25, 2009 |
Holiday Lights Recalled by Four Star Group USA Due to Fire Hazard; Sold Exclusively at Safeway Stores Electrical wiring in the lights can overheat, posing a fire hazard to consumers. |
U.S. CPSC May 9, 2007 |
Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure. |
U.S. CPSC March 29, 2004 |
Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture. |
U.S. CPSC May 23, 2006 |
Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers. |
U.S. CPSC December 11, 2002 |
Tea Lights Recalled by Home Interiors and Gifts Flames from the tea lights can flare, and the excessive heat can cause the plastic holders to melt, posing a fire hazard. |
U.S. CPSC December 29, 2006 |
Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62. |
U.S. CPSC December 11, 2008 |
Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers. |
U.S. CPSC March 4, 2003 |
Computer Monitors Recalled by IBM The monitor's circuit board can overheat and smoke, posing a fire hazard to consumers. |
U.S. CPSC February 12, 2008 |
Christmas Tree Shops Recalls Tea Light Candles Due to Fire Hazard The tea light candles have a clear, plastic shell that can melt or ignite, posing a fire and burn hazard to consumers. |
U.S. CPSC March 8, 2005 |
Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture. |
U.S. CPSC December 13, 2001 |
Homemaster Recalls Outdoor Lighting Timers Outdoor Lighting Timers have reversed polarity in the wiring, potentially allowing a current to flow through a consumer's body, posing a shock hazard to consumers... |
U.S. CPSC November 18, 2008 |
Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers. |
U.S. CPSC March 3, 2010 |
Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers. |
U.S. CPSC September 2, 2011 |
LED Night Lights Recalled by Camsing Global Due to Burn Hazard The LED night lights can overheat, smolder, and melt which may cause minor burns to consumers. |
U.S. CPSC December 8, 2004 |
Technical Consumer Products Inc. Recall of Fluorescent Light Bulbs The bulbs can overheat and spark, posing a burn hazard to consumers. |
U.S. CPSC August 3, 2007 |
LED Lights Recalled by Plan 9 Due to Fire Hazard The circuit board in the lights can overheat, posing a risk of fire. |
U.S. CPSC August 27, 2008 |
Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture. |
U.S. CPSC November 21, 2007 |
Elmo USA Corp. Recalls Visual Presenters Due to Fire Hazard Improperly installed fluorescent top lights in the presenter can overheat, posing a fire hazard. |
U.S. CPSC August 9, 2011 |
Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency. |
U.S. CPSC November 2, 2010 |
AmerTac Recalls Night Lights Due to Fire and Burn Hazard An electrical short circuit in the night light can cause it to overheat and smolder or melt which can burn consumers or result in a fire. |
U.S. CPSC October 2, 2003 |
Technuity Inc. Recall of Back-Up Power Supply Systems When used in conjunction with another power protection device, the power supply device can spark, posing a fire hazard to consumers. |
U.S. CPSC March 4, 2009 |
Holiday Lights Recalled by Universal Distribution Center Due to Shock and Fire Hazard The lights have undersized wires that can easily pull out of the plugs and light sockets becoming exposed. This poses an electric shock and fire hazard to consumers. |
U.S. CPSC March 11, 2005 |
Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture. |
U.S. CPSC December 13, 2001 |
NBG International Recall Christmas Lights "Rice Light" decorative Christmas lights have undersize wire and could present electric shock or fire hazards... |
U.S. CPSC February 15, 2005 |
Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks. |
U.S. CPSC June 30, 2010 |
Southern Technologies Recalls Drill Presses Due to Shock Hazard Wires in the motor housing can be pinched, posing a risk of electrical shock to the consumer. |
U.S. CPSC February 10, 2009 |
Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard. |
U.S. CPSC February 24, 2011 |
Pier 1 Imports Recalls Golden Tea Lights Due to Fire Hazard The flame from the tea lights can burn with a high flame, posing a fire hazard. |
U.S. CPSC December 18, 2003 |
Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks. |
U.S. CPSC January 14, 2010 |
Pier 1 Imports Recalls Glitter Tea Lights Due to Fire Hazard The flame from the tea lights can ignite the glitter on the candle, posing a fire hazard. |
U.S. CPSC November 19, 2008 |
Target Recalls Dive Sticks Due to Impalement Hazard The recalled dive sticks could remain in an upright position, posing an impalement hazard to young children. CPSC banned pre-weighted dive sticks in 2001. |
U.S. CPSC November 16, 2006 |
Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers. |
U.S. CPSC August 16, 2006 |
Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast. |