Similar Articles |
|
U.S. CPSC December 19, 2007 |
Bombardier Recreational Products Recalls Snowmobiles Due to Crash Hazard A defect in the carburetor can prevent the throttle from freely returning to the idle position. This can result in an unexpected loss of control leading to a collision and cause serious injuries or death. |
U.S. CPSC December 2, 2009 |
BRP Recalls All Terrain Vehicles Due to Loss of Steering Control The dynamic power steering can fail, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders. |
U.S. CPSC June 26, 2008 |
ATVs Recalled By Kawasaki Due to Loss of Speed Control The throttle can fail to return to the idle position when released or could fail to be at idle on start-up. This could result in loss of vehicle control, posing a risk of serious injury or death to the rider. |
U.S. CPSC April 3, 2006 |
Bombardier Recreational Products Inc. Recalls Snowmobiles for Projectile Hazard Cracks can appear in the starter ring gears, causing ring gear fragmentation at high speeds. The debris can act as a projectile causing injury or death to riders or bystanders. |
U.S. CPSC July 3, 2006 |
Bombardier Recreational Products Inc. Recalls All-Terrain Vehicles for Fire Hazard The operator could ride with their foot engaging the rear brake without noticing. This can cause the rear brake to overheat and possibly ignite, posing a risk of serious injury or death. |
U.S. CPSC June 17, 2008 |
BRP U.S. Inc. Recalls Snowmobiles Due to Fire Hazard Friction between the fuel hose and the cylinder head cover can cause the hose to pierce. This can cause fuel to leak out, posing a fire hazard. |
U.S. CPSC March 29, 2005 |
Bombardier Recreational Products Inc. and BRP US Inc. Recall of DS650 ATVs The rear axle bearings may have not been sufficiently greased. This may cause a breaking of the bearing which could make the ATV unstable. The operator could lose control of the vehicle which could cause injury to the operator. |
U.S. CPSC February 10, 2009 |
ATVs Recalled By KTM North America Due to Brake Failure The rear brake caliper support can crack and the front brake operation can experience a loss of pressure, posing a risk of the rider losing braking and steering control and suffering injuries or death. |
U.S. CPSC October 11, 2005 |
Bombardier Recreational Products Inc. Recall of All-Terrain Vehicles The drive pulley inner flange could break resulting in the broken flange fragments becoming a projectile. This situation could cause serious injuries or death to the rider or bystanders. |
U.S. CPSC May 3, 2007 |
Stateside Powersports Recalls to Repair 90cc Youth Model ATVs The ATVs lack adequate tire labeling, tire pressure gauge, adequate stop engine switch and other safety requirements which could result in injury to consumers. |
U.S. CPSC October 22, 2007 |
ATVs Recalled By KTM North America Due to Brake Failure The rear brake caliper support can crack; this could result in the potential for a loss of the use of the rear brake and subsequently lead to an accident. |
U.S. CPSC January 16, 2008 |
John Deere Tractors Recalled Due to Collision Hazard The forward drive pedal can get stuck, posing a risk of loss of control and injury to the operator and bystanders. |
U.S. CPSC May 21, 2008 |
BRP U.S. Inc. Recalls Snowmobiles Due to Explosion Hazard Under extreme cold and dry weather conditions, an explosion could occur because of sparking in the fuel tank when it is partially filled with gasoline at a low vapor pressure and the engine is left idling. This could cause serious injuries or death. |
U.S. CPSC July 8, 2010 |
All Terrain Vehicles Recalled by American Suzuki Motor Corp. Due to Loss of Control Hazard The flame arrester screen can become detached from its mounting ring, preventing the throttle valve from returning to the idle position when the throttle lever is released and causing the rider to lose control of the ATV. |
U.S. CPSC December 22, 2009 |
Polaris Industries Recalls Certain ATVs Due to Crash Hazard The front suspension ball joint stem can separate from the steering knuckle and cause the rider to lose steering control, posing a risk of injury or death to riders. |
U.S. CPSC July 28, 2005 |
American Suzuki Motor Corp. Recall of ATVs A significant impact to the front wheel of the ATV while the steering is fully turned to either side can result in suspension damage, wear, and an eventual loss of steering control that could result in injury or death. |
U.S. CPSC November 13, 2008 |
Off-Road Motorcycles Recalled by American Honda Motor Due to Risk of Swing Arm Weld Failure The weld on the right side of the swing arm can fail, causing the rider to lose control and crash. This could pose a risk of injury or death to riders. |
U.S. CPSC May 8, 2008 |
American Honda Motor Co. Recalls ATVs Due to Loss of Steering Control The electric power steering shaft of the recalled ATVs could break unexpectedly, resulting in the rider's losing steering control. This poses a risk of injury or death to riders. |
U.S. CPSC June 21, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles for Crash Hazard If the cushion lever mounting bracket on the ATV frame breaks, the rider could lose control of the ATV and crash, posing a risk of serious injury or death. |
U.S. CPSC March 4, 2008 |
Polaris Industries Inc. Recalls ATVs Due to Risk of Injury to Riders A retention bolt can come loose causing the rear wheels to lock up, which poses a risk of serious injury to the rider. |
U.S. CPSC July 24, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles The mounting brackets used to secure the left-front suspension arm to the ATV frame may not have been welded completely and could break off during riding. If this occurs the rider could lose control of the ATV and crash, posing a risk of serious injury or death. |
U.S. CPSC June 28, 2007 |
CPSC, Kawasaki Motors Corp. U.S.A. Announce Recall of All-Terrain Vehicles There is a risk of a fuel leak, which poses a fire hazard to consumers. |
U.S. CPSC September 29, 2009 |
Compact Tractors Recalled by John Deere Due to Injury Hazard An incorrectly sized differential was installed in the tractor transaxle affecting the engagement of the differential lock and causing the tractor to turn to the left when braking. This poses a risk of collision and injury to the operator and bystanders. |
U.S. CPSC December 8, 2005 |
Kawasaki Motors Corp. U.S.A. Recall of All-Terrain Vehicles Tie rod separation caused by either wear or severe impact can occur during operation, causing the front wheel to separate from the steering control. Separation of the tie rod can cause the rider to lose control of the ATV, resulting in a serious injury or death to the rider. |
U.S. CPSC January 9, 2008 |
ATVs Recalled By American Honda Motor Co. Due to Loss of Speed Control Water can enter the throttle position sensor and freeze, causing permanent damage if the rider forces the throttle lever. This could cause the throttle to stick open, posing a risk of injury or death to riders. |
U.S. CPSC March 14, 2005 |
Kawasaki Motors Corp. U.S.A. Recall of Kawasaki Prairie(TM) 700 ATVs The age recommendation warning label is missing. Children under 16 years old riding these adult-size ATVs can suffer serious injury or death. |
U.S. CPSC October 7, 2003 |
Kawasaki Recall of ATVs The lower front suspension arm can separate from the steering assembly, resulting in a loss of steering control and posing a serious risk of injury to the rider. |
U.S. CPSC May 13, 2009 |
Fushin USA Recalls Youth Model ATVs Due to Risk of Injury to Young Riders These ATVs lack front brakes, a tire pressure gauge, and padding to cover the sharp edges on the handlebar assembly, which could pose a risk of injury to young riders. |
U.S. CPSC March 16, 2005 |
American Suzuki Motor Corporation Recall of 2004-2005 Vinson and 2005 KingQuad All-Terrain Vehicles (ATVs) Water can enter the throttle lever case and freeze, causing the throttle lever to become stuck and fail to automatically return to the idle position when the rider releases the throttle. If the throttle lever does not automatically return to the idle position when the rider releases the throttle, the ATV will not slow down as the rider expects. The rider could lose control of the ATV and an accident resulting in injury or death could occur. |
U.S. CPSC August 20, 2002 |
Arctic Cat Inc. Recalls All-Terrain Vehicles The ball joints on the front suspension of these ATVs can fail, resulting in a loss of control. This can cause the ATV to overturn, posing a risk of serious injury or death to riders. |
U.S. CPSC June 26, 2008 |
ATVs Recalled By KYMCO Due to Loss of Speed Control A manufacturing defect in the carburetor can cause the throttle to stick open, posing a risk of serious injury or death to the rider. |
U.S. CPSC July 17, 2008 |
All-Terrain Vehicles Recalled By American Honda Motor Co. Due to Risk of Loss of Control Hazard If the ATV's rubber CV (constant velocity) boots get punctured or torn the joint will become contaminated and severe binding of the CV joints could occur, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders. |
U.S. CPSC March 15, 2011 |
American Suzuki Motor Corp. Recalls QuadSport ATVs Due to Crash Hazard The regulator/rectifier circuit board can fail and cause the engine to stall during riding due to an insufficient battery charge, increasing the risk of a crash. |
U.S. CPSC March 9, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles for Fire Hazard Certain 2005 Eiger model year ATVs were assembled with an improperly manufactured plastic fuel tank. The thin portion of these tanks could develop a fuel leak, posing a fire hazard. |
U.S. CPSC February 18, 2005 |
Kolpin Powersports Recall of Youth ATVs Metal-flange locking nuts securing the tie rod assemblies, integral to the steering system on the Youth ATV, can come loose. The resulting unstable steering condition could result in serious injury or death to a rider. |
U.S. CPSC August 3, 2007 |
Club Car Inc. Recalls Golf Cars and Other Vehicles; Mechanical Failure Can Result in Loss of Steering Control The steering gear assembly can fail, resulting in an unexpected loss of steering control, which poses a risk of injury to the driver and passenger. |
U.S. CPSC December 7, 2004 |
American Suzuki Motor Corporation Recall of 2004 & 2005 Eiger(TM) and Vinson(R) ATVs Recalled ATVs were assembled with an incorrectly sized mounting bolt under the fuel tank. This could result in fuel leakage presenting a fire safety hazard and risk of injury or death. |
U.S. CPSC September 22, 2004 |
Bombardier Recreational Products Inc., and Deere & Company Recall of ATVs Dispensers Front brake hose can be pulled out of its retaining brackets on either side of the ATV by foreign objects. This can cause the brake hose to wear by rubbing on the inner wheel or shock absorber spring seat, ultimately causing a brake fluid leak resulting in a complete loss of front braking capacity. This can lead to an increase in the braking distance and possible collision with bystanders, fixed objects, or other vehicles, causing serious injury or death. |
U.S. CPSC May 30, 2007 |
Polaris Recalls Select Hawkeye Model ATVs Due to Loss of Control Hazard -- Three Crashes Reported The ATV's front bearing carrier can fail due to an insufficient amount of material thickness in the area where the lower a-arm and ball joint are attached which can result in a loss of control and a crash and/or serious injury to the operator. |
U.S. CPSC September 14, 2004 |
Polaris Industries Recall of ATVs The front brake lines can crack and leak brake fluid, possibly resulting in loss of braking capability. This could result in severe injury or death. |
U.S. CPSC March 10, 2011 |
American Suzuki Motor Corp. Recalls KingQuad ATVs Due to Fire Hazard Some KingQuad ATV's plastic fuel tanks were improperly manufactured and can develop a fuel leak, posing a fire hazard. |
U.S. CPSC March 20, 2007 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles The bushing pivot mount boss on the left and right suspension arm may not have been welded completely and could break off during riding. If this occurs, the rider could lose control of the ATV and crash, posing risk of serious injury or death. |
U.S. CPSC December 14, 2005 |
American Honda Motor Corp. Recall of All-Terrain Vehicles A safety defect could exist in the transmission that could allow the rider to downshift from 1st gear into reverse without operating the reverse assist (lockout) lever. Unintended engagement of reverse gear while moving forward could lock the rear wheels and cause the rider to lose control. |
U.S. CPSC June 1, 2010 |
BRP Recalls Snowmobiles Due to Fire Hazard Friction between the fuel hose and the electronic control unit can cause the fuel hose to wear and leak fuel, posing a fire hazard. |
U.S. CPSC July 17, 2008 |
SunL Group Inc. Recalls Youth ATVs Due To Safety Defects The youth ATV lacks front brakes, a manual fuel shut-off, and padding to cover the sharp edges on the handlebar assembly. The defects could lead to young drivers losing control of the ATVs, which poses the risk of serious injuries or death. |
U.S. CPSC February 9, 2005 |
Bombardier Recreational Products Inc. Recall of Snowmobiles Inappropriate clutch ring gear installed on some units. This may cause ring gear fragmentation at high speeds and debris could act as projectiles. A projectile could cause serious injury or death. |
U.S. CPSC September 6, 2007 |
Ohalee Inc. Recalls Youth All-Terrain Vehicles Due to Mechanical Hazards; Vehicles Could Put Young Riders At Risk of Injury These youth ATVs lack front brakes and a tire pressure gauge, the date of manufacture is not printed on side of the tires, and the front suspension is solid and does not allow for travel. |
U.S. CPSC November 17, 2005 |
American Suzuki Motor Corp. Recall of 2005 King Quad All-Terrain Vehicles Use of an improper tie rod adjustment procedure during assembly could lead to separation of the tie rod end housing from the attachment shaft. This could cause the rider to lose control of the ATV and result in injury or death. |
U.S. CPSC January 31, 2007 |
American Honda Motor Corp. Recalls All-Terrain Vehicles for Crash Hazard The front suspension arm ball joints could have been contaminated during production, resulting in rapid wear of one or more of the ball joints and possible ball joint separation. If the ball joint separation occurs while riding, the operator could lose control of the ATV. |
U.S. CPSC December 22, 2010 |
BB Buggies Recalls Classic Bad Boy Buggies Again Due To Crash Hazard The off-road vehicles can accelerate without warning, posing a risk of injury to the user and/or bystanders. |