Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC May 29, 2003	Stihl Inc. Recall of Chain Saws In some units, the fuel tank vent could be installed incorrectly and become dislodged. If this occurs, fuel could leak and result in a fire.
U.S. CPSC January 11, 2006	Stihl Inc. Recall of Chain Saws These chain saws can leak fuel, posing a fire hazard.
U.S. CPSC December 23, 2010	STIHL Inc. Recalls Chain Saws Due to Laceration Hazard The throttle trigger may stick after it has been released by the operator, which could cause the engine to continue to run at a speed that drives the saw chain. This can pose a risk of a laceration injury to the user or a bystander.
U.S. CPSC September 12, 2005	DOLMAR Power Products Recall of Chain Saws The flywheels on some of the chain saws may come apart during use, which could cause serious personal injury.
U.S. CPSC September 12, 2005	Makita U.S.A. Inc. Recall of Chain Saws The flywheels on some of the chain saws can come apart during use, which could cause serious personal injury.
U.S. CPSC December 16, 2010	Trimmers/Brushcutters Recalled by STIHL Incorporated Due to Injury Hazard Vibration from the ignition module may cause the trimmer head to loosen and detach from the mounting, posing an injury hazard.
U.S. CPSC October 18, 2005	Stihl Inc. Recall of Backpack Blowers The fan wheel on these backpack blowers could break, resulting in pieces of plastic flying out of the blower housing. This poses a risk of injury to the user or a bystander.
U.S. CPSC October 30, 2008	Homelite Consumer Products Announce Recall to Repair Chain Saws Due to Chain Brake Failure The chain brake can fail to stop the chain on its first application, posing a risk of laceration to consumers.
U.S. CPSC February 11, 2005	Stihl Inc. Recall of Multi-Task Tools An internal clip may become dislodged and as a result, the clutch shoes could be projected from the clutch housing and strike consumers, posing the risk of injury.
U.S. CPSC November 6, 2007	Polaris Industries Inc. Recalls Certain Snowmobiles Due to Fire Hazard The fuel tank filler neck can crack and separate allowing fuel or fuel vapors to leak from the fuel tank. This poses a fire hazard to consumers.
U.S. CPSC May 25, 2010	Cummins Power Generation Recalls Portable Generators Due to Fire Hazard Fuel can leak through the carburetor during normal usage, posing a fire hazard to consumers.
U.S. CPSC March 17, 2011	Kawasaki Motor Recalls Backpack Blowers Due to Fire Hazard The gasoline tank can split and leak fuel, posing a fire hazard to consumers.
U.S. CPSC August 20, 2002	Black & Decker Recalls Table Saws The motor housing on the saw may crack, posing a risk of electric shock to consumers.
U.S. CPSC December 12, 2007	Outdoor Vacuums with Honda Engines Recalled By Billy Goat Industries Inc. Due to Fire Hazard The vacuum's fuel tank could crack and leak fuel. If gasoline leaking from the fuel tank is ignited, a fire or explosion can occur. This poses a fire and burn hazard to consumers.
U.S. CPSC November 8, 2007	American Honda Motor Corp. Recalls Lawn Mowers Due to Fire Hazard Due to a manufacturing defect, a crack can occur in the fuel tank causing a fuel leak. If gasoline leaking from the fuel tank is ignited, a fire or explosion can occur.
U.S. CPSC December 19, 2002	Makita U.S.A. Inc. Recall to Repair Circular Saws The lower blade guard of the saw can become jammed, which can result in the consumer coming in contact with the blade and suffering a serious injury.
U.S. CPSC March 4, 2003	Riding Lawn Tractors Recalled by Murray Inc. The fuel tank can crack and leak fuel, posing a burn and fire hazard to consumers.
U.S. CPSC November 28, 2006	MTD Southwest Inc. Recalls Troy-Bilt, Craftsman Chain Saws, Breaking Handles Pose Laceration Hazard The chain saw's plastic front handle can break during operation, which would make control difficult and pose a risk for lacerations.
U.S. CPSC December 14, 2001	DeVilbiss Air Power Recalls Porter-Cable Portable Generators A small hole in the generator's fuel tank, where it mounts to the frame, can leak fuel and pose a fire hazard to consumers...
U.S. CPSC March 27, 2003	Hitachi Koki U.S.A. Recall to Repair Circular Saws The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard.
U.S. CPSC June 25, 2002	Mountain Safety Research Recalls Stove Fuel Corrosion can cause the can to leak fuel, posing a fire or injury hazard.
U.S. CPSC May 25, 2011	STIHL Recalls Yard Power Products Due to Burn and Fire Hazards The level of ethanol and other fuel additives can distort the toolless fuel cap, allowing fuel to spill, posing a fire and burn hazard.
U.S. CPSC December 12, 2001	Kids II Inc. Recall Pop Links Toys The tips on the links that snap together like a chain, can break off, posing a choking hazard to young children.
U.S. CPSC December 21, 2006	DEWALT Recalls Cordless Reciprocating Saws for Fire Hazard The switch on these saws can short circuit, posing a fire hazard.
U.S. CPSC November 8, 2006	DeWalt Recalls Framing Saws and Circular Saws for Laceration Hazard The lower blade guard can fail to close, leaving the blade exposed and presenting a laceration hazard to consumers.
U.S. CPSC April 1, 2010	Agio International Recalls Outdoor Gas Fire Columns Sold Exclusively at Costco Due to Fire Hazard Gas can leak from connections in the column, posing a fire hazard to consumers.
U.S. CPSC November 29, 2005	Porter-Cable Recall to Repair Circular Saws The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consumers.
U.S. CPSC November 8, 2006	WMH Tool Group Inc. Recalls Wilton Mitre Saws for Laceration Hazard The blade assembly could unexpectedly break free from the stationary base, posing a laceration hazard to consumers.
U.S. CPSC April 18, 2008	Wal-Mart Recalls Charm Key Chains Due to Risk of Lead Exposure The charms on the key chain can contain high levels of lead, which is toxic if ingested and can cause adverse health effects.
U.S. CPSC May 8, 2003	Homelite Recalls Chainsaws These saws can operate while the engine is at the "idle" setting, posing a risk of serious lacerations to the operator and bystanders.
U.S. CPSC November 27, 2007	Miter Saws Recalled by WMH Tool Group Due to Laceration Hazard The saw handle's switch can fail, causing the saw to smoke, spark, and trip circuit breakers, and disable the safety brake. The saw also can keep operating unless the unit is unplugged, posing a laceration hazard to consumers.
U.S. CPSC June 19, 2008	Wal-Mart Recalls Additional Charm Key Chains Due to Risk of Lead Exposure The charms on the key chain can contain high levels of lead, which is toxic if ingested and can cause adverse health effects.
Popular Mechanics July 2007 Erik Sofge	Stihl MS 280 C-BQ Chain Saw: Quick Thinker Chain-brake systems that stop the chain in response to blade kickback are now standard on nearly every saw, but Stihl's MS 280 C-BQ doesn't stop there.
U.S. CPSC January 13, 2009	Ryobi Corded Circular Saws Sold Exclusively at Home Depot Recalled By One World Technologies Inc. Due to Laceration Hazard The return spring on the circular saw's lower blade guard can break, posing a laceration hazard to consumers.
U.S. CPSC May 18, 2005	Robert Bosch Tool Corp. Recall of Circular Saws The lower blade guard can malfunction, creating a risk of injury as severe as amputation.
U.S. CPSC March 22, 2006	Valsi Corporation Recall of Generators with Plastic Fuel Tanks For Fire Hazard The fuel tanks can crack and leak fuel, posing a risk of fires and burn injuries.
U.S. CPSC August 15, 2007	Robert Bosch Tool Corp. Recalls Skil(r) Circular Saws Due to Laceration Hazard The trigger switch on the saw can be locked "on," or the switch can be turned on, without the use of the safety lock-out. This can cause unexpected operation of the saw, posing a risk of laceration.
U.S. CPSC April 4, 2002	DeWALT Industrial Tool Co. Recall to Repair Circular Saws The spindle on the saw may slip, causing the blade to contact the lower guard, posing a hazard to the consumer from an exposed blade...
U.S. CPSC April 13, 2006	Toe-Kick Saws Recalled Due to Broken Handles The saw's plastic handle can break, causing the user to lose control of the saw which could kick back and present a laceration hazard if the blade is in motion.
U.S. CPSC August 19, 2009	Ridgid Table Saws Sold Exclusively at Home Depot Recalled by One World Technologies Due to Laceration Hazard The table saw's arbor shaft can fail when used with a stacked blade set (commonly known as a "stacked dado set"), which is used to cut grooves. The stacked blade set can be ejected from the saw, posing a potential laceration hazard to consumers.
U.S. CPSC April 29, 2008	DEWALT Recalls Table Saws Due to Laceration Hazard The pivot bracket on the saw can separate which can misalign the blade and the fence and cause kick back. This poses a laceration hazard to consumers.
U.S. CPSC May 18, 2005	Cascade Designs, Inc. Recall of Stove Fuel A manufacturing defect in the can's seam and an insufficiently applied fuel cap can cause the can to leak fuel posing a fire hazard.
U.S. CPSC February 26, 2002	Roto Zip Tool Corporation Recall of Handheld Saws The handles on these saws can separate from the body, causing the operator to be cut...
U.S. CPSC July 13, 2006	Ryobi Radial Arm Saws Recalled for Blade Detachment Hazard Cracking of the plastic motor housing can cause the blade assembly to fall during operation, posing a risk of laceration to the operator or bystanders. The detachment may occur unexpectedly and without warning.
National Gardening William Bryant Logan	Getting Smart About Chain Saws There's no meaner power tool -- learn how to select and use one wisely.
U.S. CPSC October 20, 2004	RRK Holdings Inc. to Pay Penalty for Failing to Report Hazard with Spiral Saws RRK Holdings Inc. has agreed to pay $100,000 for allegedly violating federal reporting requirements by not informing the U.S. Consumer Product Safety Commission (CPSC) in a timely manner about problems with the handle on the spiral saw.
This Old House	Chain Saw Master Carpenter Norm Abram offers these techniques for using chain saws.
IndustryWeek February 1, 2009 David Blanchard	Portrait of Best-In-Class Risk Management Risk management can help manufacturers weather supply chain storms.
Popular Mechanics October 10, 2008 Doug Mahoney	The 5 Most Dangerous Tools, And How To Use Them Safely Table Saw... Nail Gun... ...Chain Saw... Ladder... Circular Saw...
Food Engineering August 1, 2005	Feeling Squeezed? According to a new technology company, significant revenue growth can be captured by those in the supply chain who are able to add value to their physical products -- with better information and service -- without overburdening employees and operations.